Cut to Length Line CAH(11)-400D Servo Motor Customer Installation Site.
Strengthening the service quality will be conducive to the development of .

Thailand Case.
Company name: 
S.P ELECTRIC INDUSTRY CO., LTD.
Buying list
1.
Canwin Best Quality Thailand Case-CAH(23)-300DV High Speed  Cut to Length line  + Slitting line Factory,We can provide you with special transformer OEM/ODM services, even if you do not have the ability to produce you can also go to pick up your order
The product passes the verification of international quality inspection standards.

Indian Longitudinal Shear Line Case.
The design phase of is strictly carried out. Circuit diagrams, parts lists, master printed circuit artwork, parts sources, software source code, and mechanical drawings are all well handled.

1. Analysis of abnormal operation of transformers
(1) The sound of the transformer is abnormal
As soon as the transformer is connected to the power supply, there will be a buzzing sound, which is mainly due to the effect of high-voltage magnetic flux. During normal operation, the sound of the transformer is uniform. When there are other noises, you should carefully find the cause and deal with it.

As soon as the transformer is powered on, there will be a buzzing noise, which is mainly due to the high voltage magnetic flux. During normal operation, the sound of the transformer is uniform. When there are other noises, carefully find out the causes and deal with them.

The Basic Components of A Transformer
1. The basic composition of the transformer
The basic composition of large power transformers is usually divided into the following 7 parts:
1.The core part 1 includes a column, a yoke and a clamping device formed by stacking silicon steel sheets
2.Winding part one includes the lead wires of each phase winding and its connection
3.Insulation part - including oil and paper insulation between each component and its own
4.Fuel tank part - in addition to the fuel tank itself, it also includes fuel storage tanks, brackets, etc.
5.Cooling system - including cooler or radiator, oil pump, fan, manifold, etc.
6.Measuring instruments - including signal thermometers, current transformers, oil level gauges, etc.
7.Protection devices - pressure releasers, gas relays, moisture absorbers, etc.
Among them, the first two parts can also be called the magnetic circuit part and the circuit part, which are the basic parts.

There are many reasons why the temperature of the transformer is too high, which may be the cause of the fault of the transformer itself, or it may be the reason outside the transformer.

A Successful Debuging in TBEA XINJIANG

(CANWIN ZJ1250-10T High Speed Spacer Slitting Line)
Siemens System
Full Servo Motor Driven
Speed: 200m/min
Decoiler : 10Tons
Discharger : 10tons
Want to know more? Send inquiry right now!
Email: flora@canwinsg.com
Web: www.canwindg.com
Whatsapp: +8613702282846
#highspeedslittingline #transformerequipment

The main content of the transformer oil tank section is the types of transformer oil tanks.
The transformer oil tank is the container that holds the body and transformer oil. Its main functions are:
Oil container
Heat dissipation
Protective insulation: isolate insulation from the atmosphere, avoid absorbing moisture and gas, and prevent oil aging
Dry insulation: Acts as a "vacuum tank" when vacuuming at room temperature on site
Pedestal
Transportation

When the transformer oil level does not conform to the oil temperature, that is, does not conform to the temperature curve, it is judged that the oil level is abnormal. Abnormal oil level is mainly manifested as false oil level and low oil level.


(1) Failure of the oil level indicator: check and repair the oil level indicator.


(2) The respirator is blocked, so that air cannot enter when the oil level drops, and the oil level indication is too high: clear the respirator.


(3) Gas accumulates in the oil chamber of the oil conservator, making the oil level higher than the actual oil level: the oil conservator must be filled and exhausted.


(4) The oil chamber of the oil conservator is poorly sealed (the diaphragm or capsule is broken, the bellows is cracked, etc.), so that the oil level enters the diaphragm or capsule, and the oil level is low: overhaul the oil conservator.


(5) The transformer leaks seriously, causing the oil level to be low: deal with the leak point and refill the oil.

Analysis of abnormal operation of transformers
Transformer sound is abnormal


As soon as the transformer is connected to the power supply, there will be a buzzing sound, which is mainly due to the effect of high-voltage magnetic flux. During normal operation, the sound of the transformer is uniform. When there are other noises, you should carefully find the cause and deal with it.

ABB Schneider Huawei OEM Supplier——Canwin Dry Type Transformers
Long life warranty : 6years
Low on-load and no-load losses; Low noise level
Possibility of operation at the temperature range
-80°С fans off
-100°С Fans on
-130°С Alert
-150°С Shut down
Qualitative materials and components
Electro-technical steel with low specific losses
Foil windings from brand manufacturers
Learn more, pls send inquiry with details.