Epoxy resin
Epoxy resin products are non - combustible, flame retardant, self - extinguishing solid insulation material, safe and clean. It is also a solid insulation material with proven insulation and heat dissipation technology for more than 40 years.Epoxy resin products can be used for dry type transformer, for insulation parts, for instrument transformer, for electrical composite parts and for room temperature curing.
Epoxy resin transformer uses epoxy resin as insulation material. The high and low voltage windings are made of copper tape (foil), industrial epoxy resin is poured in vacuum and cured, forming a high strength FRP body structure. Insulation grade F, H. Epoxy resin dry transformer has the characteristics of good electrical performance, strong resistance to lightning impact, strong resistance to short circuit, small size and light weight. Temperature display controller can be installed to display and control the operating temperature of the transformer winding to ensure the normal service life of the transformer.
Send your inquiry
Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.
High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer.
Insulation grade F, H.It has the ability of anti-electromagnetic interference stipulated by the state. At the same time, reserved intelligent computer interface, remote control.
The inner and outer surfaces of the coil are reinforced by glass fiber mesh cloth.After circuit processing, the temperature of each phase winding is displayed on the control board. It has the function of temperature setting, manual/automatic start and stop of fan, alarm of over temperature sound and light signal and automatic trip of over temperature, etc.
High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.
The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.
Specializing in the research and development of Silicon Steel Sheet Cut to Length Lines, power transformers, Silicon Steel Sheet Slitting Lines, and Transformer Foil Winding Machines, the company operates with a strong emphasis on innovation and precision engineering.
Mobile:+86 1370-228-2846
Tel: (+86) 750-887-3161
Fax: (+86) 750-887-3199
E-mail: info@canwinsg.com
Office add: No.1 Pankeng Road, Gonghe Town, Heshan, Jiangmen, GD, China 529700
Singapore office add: 10, Bukit Batok Crescent, #04-04, The Spire, Singapore 658079