CANWIN — Engineering the Core of Power. Building What Comes Next.

Epoxy Resin For Dry Type Transformer

Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.

Inquiry

Write a Review

What is epoxy resin transformer?

A dry type transformer is a transformer that does not use liquid as insulation for its winding or core. Instead the windings and core are kept within a sealed cast epoxy resin. Cast resin dry type transformers are used in high moisture areas.

Why resin is used in transformer?

Better insulation: The resin is a very effective electrical insulator, which helps prevent short circuits and system malfunctions. Easy maintenance: Since the resin transformer does not require insulating oil, maintenance is much easier to carry out and less expensive.

Features and Devices of Epoxy Resin Transformers

Epoxy resin transformers can be used as replacement products for oil-immersed distribution transformers. They are products with better performance among all kinds of dry type transformers. They are especially suitable for urban power grids, high-rise buildings, business centers, theaters, hospitals, hotels, tunnels, subways, underground power stations, laboratories, stations, docks, airports, combined substations and other important places.

Ⅰ. Features of epoxy resin transformers

Due to advanced design, high-quality materials, scientific formula, strict process and high-standard testing, the product has the following characteristics:

1. The high-voltage coil is made of copper wire, and the low-voltage coil is wound with copper wire or copper foil. Epoxy resin is poured in a vacuum state. After curing, it forms a solid cylindrical whole with high mechanical strength, small partial discharge, and high reliability.

2. Flame retardant, explosion-proof, non-polluting environment. The glass fiber and other insulating materials used for winding coils of epoxy resin transformers have self-extinguishing characteristics, and will not generate arcs due to short circuits, and the resin will not produce toxic and harmful gases under high heat.

3. The coil does not absorb moisture, and the iron core clip has a special anti-corrosion protective layer, which can be used in 100% relative humidity and other harsh environments. Intermittent operation without dehumidification treatment.

4. High level of anti-short circuit and lightning impact.

5. The inner and outer resin layers of the coil are thin, and the heat dissipation performance is good. The cooling method generally adopts air natural cooling (AN). For power transformers with any protection level, air cooling system (AF) can be configured to improve short-term overload capacity and ensure safe operation.

6. Low loss, good power saving effect, economical operation and maintenance-free.

Ⅱ. Epoxy resin transformer device

Shell security gadget: epoxy tar transformer shell fabric is made of stainless steel or aluminum combination. The degree of security comes to IP20 and IP23. The IP20 shell can avoid the passage of strong remote objects with a distance across more noteworthy than 12mm, and give assist security assurance for the transformer. The IP23 shell too avoids the influx of water beads inside an point of 60° from the vertical line, and is appropriate for open air operation.

Temperature control and temperature show: The epoxy tar transformer temperature control framework is composed of a temperature controller and a PTC temperature measuring component introduced on the upper conclusion of the low-voltage winding, which is the most smoking point of the item, to realize temperature estimation and control of the transformer. If the temperature of the transformer winding is as well tall, the temperature controller will send out an caution flag, and it will naturally trip when the temperature surpasses the secure esteem. When constrained discuss cooling is utilized, the temperature controller decides the input or exchanging of the cooling fan concurring to the winding temperature. The temperature show framework straightforwardly shows the hot spot temperature of the winding amid the operation of the power transformer, and can be utilized in conjunction with the temperature control framework.

Product Name	Mixing Ratio (pbw)	ig(°Q	Thermal Class	Product Properties
JT 8055A/B (Prefilled)	100/100	65-80	F	Standard system, low viscosity, has excellent mechanical properties and long-tenn proterties
JT 8869A/B (Prefilled)	100/100	65-75	F	L6v viscosity, has excellent mechanical properties and tong-term pcoterties
JT 8948A/B/Silica	100/80/180-220	85-95	H	Long-term stable mechanical and electrical nrpffxtrvirvp pvpo At hinh Ah irp
JT 8968A/B(Prefilled)	100/100	85-95	H	Long-term stable mechanical and electrical preformance even at high temperature
JT 8980A/B/D40/ D62 (Unfilled)	100/100/6.7/0.2	85-100	H	Long-term stable mechanical and electrical nrpffxtrvirYP pvpo At hinh fpmnwAh irp
JT 8988A/B(Unfilled)	100/80	85-95	H	Long-term stable mechanical and electrical preformance even at high temperature
JT 8098A/B(Unfilled)	100/100	85-100	H	Lonq-term stable mechanical and electrical preformance even at high temperature
JT 8068A/B/ Silica	100/100/200-300	65-80	F	High cracking resistance and low coefficient of thermal expansion
JT 8O68-1A/B/ Silica	100/80/180-220	65-80	F	Low viscosity, good aacking resistance
JT 8832A/B/ Silica	100/72/258	80-90	F	High mechanical strength, excellent heat shock resistance
JT 8088A/B (Unfilled)	100/80	65-80	F	High cracking resistance and low coefficient of thermal expansion
JT 8058A/B (Prefilled)	100/100	65-80	F	Flame retardant
JT 8O58-1A/B/ Silica(ATH)	100/80	65-80	F	Flame retardant
JT 8048A/B (Prefilled)	100/100	85-95	H	High temperature resistance, excellent mechanical properties
JT 8048-1A/B/ Silica	100/80	85-95	H	High temperature resistance, excellent mechanical properties
JT 8538A/B/ ATH/Silica	100/100/310/80	50-60	F	Flame retardant

Epoxy Resin For Dry Type Transformer 6

FAQ

1.What can we do for you ?

We can provide you with power transformer manufacturing equipment and technical services for you to create a strong competitive transformer factory. We can provide you with special transformer OEM/ODM services. Even if you do not have the ability to produce, you can also go to pick up your order. We can provide you with all the high quality raw materials you need for your transformer plant production. Of course, the price must be very attractive!

2.How many years have your company made this kind of equipment?

We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.

3.Which certificate do you have for your equipment?

We have owned 56 patents in fields of the international invention. ISO9001 / SO14001/ STL / ASTA / KEMA

4.Can you send your staff to install the equipment for us?

After - sales free to provide engineers on-site installation and debugging and professional technical training.Answer your technical or technical questions by phone or in writing.

5.Do you have any agent in our country?

CANWIN transform and upgrade traditional industries as an opportunity to deepen the " one belt and one road" strategic layout, deepen cooperation with foreign markets. in the form of cooperation and mutual benefit, set up the transformer manufacturing center and core processing base in the Middle East, India. Dubai. Vietnam. Thailand. etc.In the future, CANWIN will move towards the direction of intelligent equipment leader, making China a global reputation!

Basic Information

Year Established

2008
Business Type

--
Country / Region

新加坡
Main Industry

Power Distribution Equipment
Main Products

electrical equipment,transformers and distribution cabinets, electrical materials, Laser welding machine/ Laser Cutting machine,Energy Storage System
Enterprise Legal Person

Chen Shangyou
Total Employees

101~200 people
Annual Output Value

25M USD
Export Market

European Union,Middle East,Eastern Europe,Southeast Asia,America
Cooperated Customers

--

Company Profile

CANWIN Electric PTE Ltd., established in 2002, is a leading global manufacturer of power transformer equipment. The company has achieved ISO9001 and ISO14001 international system certifications, along with STL, ASTA, and KEMA accreditations. It has also founded specialized research centers, including the Silicon Steel Sheet Engineering Technology Research Center, the Metal Sheet and Strip Precision Cutting Key Technology and Equipment Engineering Center, and the Power Transformer Intelligent Manufacturing Center. Recognized as a National High-Tech Enterprise domestically, CANWIN was honored with the "Machinery Industry Science and Technology Progress Award" and the "Provincial Science and Technology Progress Award" in 2020.

The "CANWIN" brand was officially registered domestically in 2007 and expanded its trademark registration to 118 countries and regions in 2017, including the European Union, Africa, South America, the United States, Russia, India, and Southeast Asia. Focusing on R&D for silicon steel sheet cut-to-length lines, slitting lines, and transformer foil winding machines, the company holds 56 international invention patents.

Adhering to a management philosophy integrating high-end manufacturing, intelligent equipment, and smart factories, CANWIN continuously enhances product quality, cutting speed, and precision, contributing to the advancement of the global power transformer industry.

Company Video