electrical energy generation transmission and distribution

Siemens series electric two shear four punch, robot stack the whole transformer core, stack 2-6 at a time;This is the new design, not any further news can be introduce. ;This unique machine is prepared to automatically produce open power transformer cores with separated top yoke as well as closed power transformer cores including top yoke. As the line can be used to either stack such cores (with or without top yoke) or separate accurate leg and yoke logs, it provides a lot of flexibility to fulfil the various customer’s needs of a transformer core service center.If you want to know more, pls send email to : info@canwinsg.com 

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

CAZJ-1250B: CNC precision slitting line is mainly used for strip silicon steel sheet coils processed by high-speed precision, mainly consist of:1. Motor Decoiler: 1 set 2. Decoiler trolley: (Assist operation platform): 1 set3. Guard rail/shaft: 2 sets4.1250 type rolling coil slitting machine(with 07set alloy cutter ): 1 set5.Material photoelectric detection device: 2 set6.Pneumatic tensioner:  1 set7. Motor Recoiler: 1 set8.Electric trolley: 1 set9.Pneumatic system:1 set10.Electrical control system: 1 set

Insulation grade F, H.It has the ability of anti-electromagnetic interference stipulated by the state. At the same time, reserved intelligent computer interface, remote control. 

The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.

10KV intelligent box type switcher is a new generation of load switcher, vacuum breaker and other switch elements, suitable for distribution automation, that is, compact and scalable distribution equipment. It has the advantages of oil-free, multi-combination, maintenance, modular, corrosion resistance, high reliability, strong adaptability to the environment and so on. In and out of the loop according to the requirements of users, you can meet the manual, electric operation, circuit breaker circuit by matching the corresponding intelligent controller and other related equipment.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the silicon steel lamination core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for silicon steel transformer laminations manufacturing.

Three-dimensional wound core transformer breaks through the traditional triangle plane structure, adopts three-phase symmetric vertical structure, magnetic circuit completely symmetrical three-phase core products, magnetic resistance is greatly reduced, excitation current, no-load loss, is a kind of using traditional materials, but lower operating noise, structure is more compact and efficient energy-saving transformers. Its excellent performance in energy saving and energy saving and environmental protection is in line with China's energy conservation policy.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

CANWIN 400 High-speed Cutting Line Technical Specification Requirements(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.

Canwin Professional CANWIN Automatic Cut To Length Lines Machine (CAH(11)-300) manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.

YBM (P) series box transformer substation (hereinafter referred to as box transformer) is a compact complete set of power distribution equipment composed of high-voltage power equipment, power transformer, low-voltage electrical equipment and auxiliary equipment.