Three-dimensional wound core transformer breaks through the traditional triangle plane structure, adopts three-phase symmetric vertical structure, magnetic circuit completely symmetrical three-phase core products, magnetic resistance is greatly reduced, excitation current, no-load loss, is a kind of using traditional materials, but lower operating noise, structure is more compact and efficient energy-saving transformers. Its excellent performance in energy saving and energy saving and environmental protection is in line with China's energy conservation policy.
Product features
What is an Oil-Filled Transformer? Oil-filled or oil immersed type transformers are voltage conversion devices that use oil to keep the transformer cool. This type of oil type transformer structure is mounted in a welded steel oil tank filled with oil.
The energy-saving and environmental protection effect of this product is significant.
• The three-dimensional triangular coil core is compared with the flat core performance and materials.
• Energy saving: the no-load loss S13 is 25% lower than that of the S11 national standard, and the no-load current S13 is 80% lower than that of the S11 national standard.
• Energy saving: 20% of silicon steel and 2-3% copper.
• Ultra-low silent: noise can be reduced by 7-1 Odb.
• Comparison conditions: the same cross sectional area, the same window height, the same core center distance. The core is made up of three identical single box split, split after the equilateral triangle three-dimensional structure has good stability, core high mechanical strength, three-phase stress is consistent, make body anti-short circuit ability enhancement. The iron core is processed by vacuum annealing in the manufacturing process, which can basically eliminate the internal stress, and there is no high magnetic resistance in all parts of the magnetic circuit, so that the no-load loss and the no-load current are greatly reduced.
• The iron core has no joints continuous winding, the silicon steel belt is tightly structured and the work vibration is small, and the noise can be reduced to a minimum.
• The three-phase magnetic circuit of the core is consistent, and the core and the plane coil core transformer are the shortest, ensure the three-phase power supply balance, and make the reducing loss effective.
• Silicon steel sheet shears can be made without waste processing, i.e., the utilization rate of materials is 100%. The iron core has no joint continuous winding, but the maximum can eliminate the artificial lamination, folding, lifting of the iron yoke caused by the quality fluctuation, reduce the processing procedure, raise up the productivity.
• High utilization coefficient of triangle core space and reduced length of coil wire can save raw materials and reduce load loss, thus reducing the weight of transformer. And the volume is smaller than conventional products, compact structure, beautiful appearance, small footprint.
• Low consumption, low operating cost and high cost performance, so that the user can withdraw the investment in a short time.
Advantages of Using an oil type transformer
Effective and Efficient Cooling
Oil-cooled transformers use insulating oil to cool the transformer. The oil in oil-cooled transformers effectively cools the transformer because it has a high heat capacity. This means that the oil can absorb a large amount of heat before it gets hotter.
The oil used in oil-cooled transformers also has a high thermal conductivity. As a result, the oil can efficiently transfer heat from the transformer to the surrounding air. These two properties make oil an effective and efficient cooling agent for transformers. oil filled transformer
Safe and Reliable
Oil-cooled transformers are also safe and reliable to use. This is because the oil used in these transformers is non-flammable and has a high flash point. This means that the oil will not catch fire easily and is less likely to cause an explosion.
In addition, oil-cooled transformers are also less likely to fail than other types of transformers. This is because the oil used in these transformers acts as a shock absorber that cushions the components of the transformer in case of an electrical fault.
Durable
Oil-cooled transformers, especially the ones manufactured by Daelim, are also durable and can withstand a lot of wear and tear. This is because the oil used in these transformers acts as a sealant that prevents water and other contaminants from entering the transformer.
The oil used in oil-cooled transformers also has a high viscosity. This means that the oil will not leak easily from the transformer. That way, you can be sure that your transformer will not develop any leaks even after years of use.
Long Lifespan
Another advantage of using an oil-cooled transformer is its long lifespan. This is because the oil used in these transformers acts as a lubricant that reduces friction between the moving parts of the transformer.
The oil also protects the transformer from corrosion and rust. This means oil-cooled transformers are less likely to experience premature failure due to corrosion or rust.
Boiler Oil-immersed Transformer
• The electric furnace transformer produced by our company can be overloaded for a long period of 30 to 501 %. The consumption of smelting electricity consumption decreased by 5-10%, and output increased by 15-20%.
• The electric furnace transformer produced by our company can be overloaded for a long period of 30 to 501 %. The consumption of smelting electricity consumption decreased by 5-10%, and output increased by 15-20%.
• Conditions of use
• Altitude: < 1000m
• Ambient temperature: 1.2 + 40 X) to 25 1.3
• Air relative humidity: 90% (+ 25 XJ)
• Device type: outdoor type
Installation site: no corrosive gas, no obvious dirt, etc.
It is used for the smelting of steel-making and non-ferrous metals, the extraction of various ferroalloys, silicon compounds and the withdrawal of pure silicon.
Canwin is a professional Power Transformer Company & Distributor. Power and distribution transformers for reliable and energy efficient power distribution networks. Discover our Products & Services.We connect energy systems and bring power from where it's generated to where it's needed,including Large power transformers, Medium power transformers.
FAQ
1.What can we do for you ?
We can provide you with power transformer manufacturing equipment and technical services for you to create a strong competitive transformer factory. We can provide you with special transformer OEM/ODM services. Even if you do not have the ability to produce, you can also go to pick up your order. We can provide you with all the high quality raw materials you need for your transformer plant production. Of course, the price must be very attractive!
2.How many years have your company made this kind of equipment?
We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.
3.Which certificate do you have for your equipment?
We have owned 56 patents in fields of the international invention. ISO9001 / SO14001/ STL / ASTA / KEMA
4.Can you send your staff to install the equipment for us?
After - sales free to provide engineers on-site installation and debugging and professional technical training.Answer your technical or technical questions by phone or in writing.
5.Do you have any agent in our country?
CANWIN transform and upgrade traditional industries as an opportunity to deepen the " one belt and one road" strategic layout, deepen cooperation with foreign markets. in the form of cooperation and mutual benefit, set up the transformer manufacturing center and core processing base in the Middle East, India. Dubai. Vietnam. Thailand. etc.In the future, CANWIN will move towards the direction of intelligent equipment leader, making China a global reputation!
CONTACT US
LEAVE A MESSAGE
Please fill out and submit the form below, we will contact you in 48 hours, thank you!
RECOMMENDED
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.