causes of transformer explosion

Overview of intelligent high-speed silicon steel sheet shearing line(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.

100KW/200KWH Containerized Energy Storage SystemProduct model: HT-CN-100KW/200KWH Product Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.6. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.

The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

China's first robot laminating horizontal china automatic cut to length line in Guangdong CANWIN successfully developed!  The equipment adopts double-layer servo AI intelligent software development, five pieces of a stack, robot extraction five pieces at a time;  This equipment has three sets of systems, can stack the whole transformer core, 1+E, five columns;  This technology subverts the traditional lamination process and reaches the international advanced level!  Canwin Customized AI Smart Robot Cut To Length Line + manufacturers From China,We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.Canwin Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.

The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this transformer core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This core slitting machine lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally. 

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

200KW/400KWHContainer Energy Storage SystemProduct model: HT-CN-100KW/200KWHProduct Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid.6. So as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.8. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.

The handheld fiber laser welder is a new generation of laser welding equipment, which belongs to non-contact welding. The operation process does not require pressure and its working principle is to directly irradiate a high-energy intensity laser beam on the surface of the material. The material is melted inside, and then cooled and crystallized to form a weld through the interaction of the laser and the material.

Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

Copper foil has low surface oxygen characteristics and can be attached to a variety of different substrates, such as metal, insulation materials, etc., with a wide temperature range. Mainly used in electromagnetic shielding and antistatic, the conductive copper foil on the substrate surface, combined with the metal substrate, has excellent conductivity, and provides electromagnetic shielding effect. It can be divided into: self-adhesive copper foil, double guide copper foil, single guide copper foil, etc. Electronic grade copper foil (purity more than 99.7%, thickness of 5um-105um) is one of the basic materials of the electronic industry. With the rapid development of the electronic information industry, the use of electronic grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium ion batteries. TV sets, VIDEO recorders, CD players, photocopiers, telephones, heating and cooling air conditioners, automotive electronic components, game machines, etc. The demand for electronic grade copper foil, especially for high performance electronic grade copper foil, is increasing day by day in domestic and foreign markets.