foil transformers

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the silicon steel lamination core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for silicon steel transformer laminations manufacturing.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.

CANWIN Group offers transformers for different applications:• Power distribution general-purpose transformers• Service transformers for electric power stations and other objects• Converter transformers for direct-current drive in metallurgical, drill, gas-and-oil producing and other branches of industry• Тransformers for converter installations of the urban transport (subway, tramway, trolleybus)• Тransformers for converters of the excitation system of turbo and hydro-generatorsDepending on the customer requirements, transformers can be of the following design versions:Left• HV winding inputs are on the left regarding the front (side of the rating plate)Right• HV winding inputs are on the right regarding the front (side of the rating plate)• Up: inputs of the LV and HV windings are on the transformer upper cover• Other design versions are up to the customer request 

500KW/1MWH Containerized Energy Storage SystemProduct model: HT-CN-500KW/1MWHProduct Features1. Support up to 2*500KW bi-directional inverters in direct parallel.2. Interface with dispatching system.3. Black-start function of full station load.4. Automatic switching function between grid connected and off grid status.5. Battery management system (BMS) for efficient management of battery clusters.6. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.

Five years of hard work, Finally Success! The first China Made robot automatic laminated horizontal cutting line in CANWIN successfully developed! A dual-robot six-station automatic laminating Cut to length line. This product is the first in the world and the domestic first. Its key technology is to grab five pieces at a time (two robots are equivalent to ten pieces at a time). Six transformer cores can be stacked [multiple invention patents have been applied for]; This equipment has three sets of systems, which can stack the whole transformer core, 1+E, five columns. 

Definition of electrical steelElectrical steel, also known as silicon steel sheet, is an important soft magnetic alloy indispensable to power, electronics and military industry, as well as the largest output of metal functional materials, mainly used as the iron core of various motors, generators and transformers. Its production process is complex, manufacturing technology is strict, foreign production technology is protected in the form of patent, as the life of the enterprise. The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.

Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers-CANWINThe CANWIN iron core processing center is composed of Siemens motion control system and servo motor, suspended dual robot lamination mechanism, six station servo exchange platform, and dual station logistics channel. Combined with the Keying 1250 type spacer type high-speed longitudinal cutting line, the MES intelligent warehouse system seamlessly connects with the iron core processing center. Effectively solved the problems of only cutting and not stacking horizontal cutting lines in the past, requiring repeated handling by transfer vehicles, troublesome pre positioning of truss mechanical laminations, low work efficiency, large land occupation, and the need for manpower! Especially suitable for standardized production of super enterprises in the future power industry (with massive annual output ).

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally. 

Canwin Wholesale dry type transformer manufacturers in india with good price - Canwin,The brand name of CANWIN has been registered in China, European Union, Africa, South America, United States, Russia, India, Southeast Asia and other 118 countries.Canwin Customized Wholesale dry type transformers manufacturers with good price - Canwin Automatic manufacturers From China,The trademark "CANWIN" has won the title of the famous trademark of the international electrotechnical association and the trademark CANWIN CNC" has been recognized as a high -end manufacturing brand in China.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

Canwin Professional CANWIN Automatic Cut To Length Lines Machine (CAH(11)-300) manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.

100KW/200KWH Containerized Energy Storage SystemProduct model: HT-CN-100KW/200KWH Product Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.6. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.