transformer insulation temperature rating

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

CAH(23)-400DO: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work for York-sheet with two floor stacking；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2-4 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.

200KW/400KWHContainer Energy Storage SystemProduct model: HT-CN-100KW/200KWHProduct Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid.6. So as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.8. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.

China's first robot laminating horizontal china automatic cut to length line in Guangdong CANWIN successfully developed!  The equipment adopts double-layer servo AI intelligent software development, five pieces of a stack, robot extraction five pieces at a time;  This equipment has three sets of systems, can stack the whole transformer core, 1+E, five columns;  This technology subverts the traditional lamination process and reaches the international advanced level!  Canwin Customized AI Smart Robot Cut To Length Line + manufacturers From China,We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.Canwin Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.

100KW/200KWH Containerized Energy Storage SystemProduct model: HT-CN-100KW/200KWH Product Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.6. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.

Three-dimensional wound core transformer breaks through the traditional triangle plane structure, adopts three-phase symmetric vertical structure, magnetic circuit completely symmetrical three-phase core products, magnetic resistance is greatly reduced, excitation current, no-load loss, is a kind of using traditional materials, but lower operating noise, structure is more compact and efficient energy-saving transformers. Its excellent performance in energy saving and energy saving and environmental protection is in line with China's energy conservation policy.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

A dry type transformer does not have any rotating parts; it is a motionless device that utilizes eco-friendly temperature insulation systems. This type of transformer is also named as “cast resin type transformers”. It is used in various commercial, industrial, as well as utility applications.

Model: CAZJ -1250-10TThe basic engineering of mechanical equipment1.Equipment foundation plan. And the delivery date for 10 working days after signing a contract.2.Buyer is responsible for all equipment foundation engineering construction and supervision.3.Equipment foundation holes are reserved hole to match the anchor hole of equipment base.4.Base hole cement grouting after equipment installation is in charge of the buyer, seller offer foundation bolt by random.Supply power, gas and oil1. Buyer is responsible for a stable power supply to operating station.2. Buyer provide one set of air compressor and cooler by himself.3. Buyer provide gear oil, hydraulic oil, lubricating oil, and seller offer oil brand.4. Buyer will provide requested material for mechanical debugging.Roduction workshop1. Production line processing set- up length is about 14m.2. The production workshop area: length 18 m X width 8 m X high 6 m.3. Equipped with one set of goods crane carrying more than 20 t , and production workshop corollary equipment.4. Production workshop is equipped with lighting equipment, and 42℃ below room temperature environment.Note: We have the final explanation right for this contract specification.

1) Two sets of V-shaped shearing machines and three sets of hole punching machines. The three punching mechanism adopts a chasing shear design, which can move vertically and horizontally, automatically arrange positions, and easily achieve three simultaneous steps and five synchronous cutting;2) The material handling part adopts a gantry type servo belt mechanism, which can automatically rise and fall with the change of stacking height;3) Equipped with a stacking electric trolley, the trolley can move left and right, the upper stacking platform can be lifted and lowered, and even workshops without truss cars can produce iron cores!4) The shear bed section has added a four wheel drive micro tension servo pulling mode, and cutting of materials with different thicknesses of 0.15-0.35 mm does not require changing the cutting parameters!

The inner and outer surfaces of the coil are reinforced by glass fiber mesh cloth.After circuit processing, the temperature of each phase winding is displayed on the control board. It has the function of temperature setting, manual/automatic start and stop of fan, alarm of over temperature sound and light signal and automatic trip of over temperature, etc.