example of electrical system

The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

Insulation grade F, H.It has the ability of anti-electromagnetic interference stipulated by the state. At the same time, reserved intelligent computer interface, remote control. 

Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally. 

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this transformer core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This core slitting machine lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.

High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 

CAH(23)-400-600-800LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.

CANWIN Group offers transformers for different applications:• Power distribution general-purpose transformers• Service transformers for electric power stations and other objects• Converter transformers for direct-current drive in metallurgical, drill, gas-and-oil producing and other branches of industry• Тransformers for converter installations of the urban transport (subway, tramway, trolleybus)• Тransformers for converters of the excitation system of turbo and hydro-generatorsDepending on the customer requirements, transformers can be of the following design versions:Left• HV winding inputs are on the left regarding the front (side of the rating plate)Right• HV winding inputs are on the right regarding the front (side of the rating plate)• Up: inputs of the LV and HV windings are on the transformer upper cover• Other design versions are up to the customer request 

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.