transformer increase voltage

Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.

Three-dimensional wound core transformer breaks through the traditional triangle plane structure, adopts three-phase symmetric vertical structure, magnetic circuit completely symmetrical three-phase core products, magnetic resistance is greatly reduced, excitation current, no-load loss, is a kind of using traditional materials, but lower operating noise, structure is more compact and efficient energy-saving transformers. Its excellent performance in energy saving and energy saving and environmental protection is in line with China's energy conservation policy.

High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

CAZJ-1250B: CNC precision slitting line is mainly used for strip silicon steel sheet coils processed by high-speed precision, mainly consist of:1. Motor Decoiler: 1 set 2. Decoiler trolley: (Assist operation platform): 1 set3. Guard rail/shaft: 2 sets4.1250 type rolling coil slitting machine(with 07set alloy cutter ): 1 set5.Material photoelectric detection device: 2 set6.Pneumatic tensioner:  1 set7. Motor Recoiler: 1 set8.Electric trolley: 1 set9.Pneumatic system:1 set10.Electrical control system: 1 set

Insulation grade F, H.It has the ability of anti-electromagnetic interference stipulated by the state. At the same time, reserved intelligent computer interface, remote control. 

dry type transformer is widely used in local lighting, high-rise buildings, airports, terminals CNC mechanical equipment and other places, simply said dry transformer refers to the core and winding are not impregnated in the transformer insulation oil.

Definition of electrical steelElectrical steel, also known as silicon steel sheet, is an important soft magnetic alloy indispensable to power, electronics and military industry, as well as the largest output of metal functional materials, mainly used as the iron core of various motors, generators and transformers. Its production process is complex, manufacturing technology is strict, foreign production technology is protected in the form of patent, as the life of the enterprise. The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

500KW/1MWH Containerized Energy Storage SystemProduct model: HT-CN-500KW/1MWHProduct Features1. Support up to 2*500KW bi-directional inverters in direct parallel.2. Interface with dispatching system.3. Black-start function of full station load.4. Automatic switching function between grid connected and off grid status.5. Battery management system (BMS) for efficient management of battery clusters.6. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the silicon steel lamination core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for silicon steel transformer laminations manufacturing.