transformer purpose in power system

Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.

Three-dimensional wound core transformer breaks through the traditional triangle plane structure, adopts three-phase symmetric vertical structure, magnetic circuit completely symmetrical three-phase core products, magnetic resistance is greatly reduced, excitation current, no-load loss, is a kind of using traditional materials, but lower operating noise, structure is more compact and efficient energy-saving transformers. Its excellent performance in energy saving and energy saving and environmental protection is in line with China's energy conservation policy.

Model: CAZJ -1250-10TThe basic engineering of mechanical equipment1.Equipment foundation plan. And the delivery date for 10 working days after signing a contract.2.Buyer is responsible for all equipment foundation engineering construction and supervision.3.Equipment foundation holes are reserved hole to match the anchor hole of equipment base.4.Base hole cement grouting after equipment installation is in charge of the buyer, seller offer foundation bolt by random.Supply power, gas and oil1. Buyer is responsible for a stable power supply to operating station.2. Buyer provide one set of air compressor and cooler by himself.3. Buyer provide gear oil, hydraulic oil, lubricating oil, and seller offer oil brand.4. Buyer will provide requested material for mechanical debugging.Roduction workshop1. Production line processing set- up length is about 14m.2. The production workshop area: length 18 m X width 8 m X high 6 m.3. Equipped with one set of goods crane carrying more than 20 t , and production workshop corollary equipment.4. Production workshop is equipped with lighting equipment, and 42℃ below room temperature environment.Note: We have the final explanation right for this contract specification.

1) Two sets of V-shaped shearing machines and three sets of hole punching machines. The three punching mechanism adopts a chasing shear design, which can move vertically and horizontally, automatically arrange positions, and easily achieve three simultaneous steps and five synchronous cutting;2) The material handling part adopts a gantry type servo belt mechanism, which can automatically rise and fall with the change of stacking height;3) Equipped with a stacking electric trolley, the trolley can move left and right, the upper stacking platform can be lifted and lowered, and even workshops without truss cars can produce iron cores!4) The shear bed section has added a four wheel drive micro tension servo pulling mode, and cutting of materials with different thicknesses of 0.15-0.35 mm does not require changing the cutting parameters!

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This core slitting machine lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the silicon steel lamination core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for silicon steel transformer laminations manufacturing.

10KV intelligent box type switcher is a new generation of load switcher, vacuum breaker and other switch elements, suitable for distribution automation, that is, compact and scalable distribution equipment. It has the advantages of oil-free, multi-combination, maintenance, modular, corrosion resistance, high reliability, strong adaptability to the environment and so on. In and out of the loop according to the requirements of users, you can meet the manual, electric operation, circuit breaker circuit by matching the corresponding intelligent controller and other related equipment.

dry type transformer is widely used in local lighting, high-rise buildings, airports, terminals CNC mechanical equipment and other places, simply said dry transformer refers to the core and winding are not impregnated in the transformer insulation oil.

High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.

Definition of electrical steelElectrical steel, also known as silicon steel sheet, is an important soft magnetic alloy indispensable to power, electronics and military industry, as well as the largest output of metal functional materials, mainly used as the iron core of various motors, generators and transformers. Its production process is complex, manufacturing technology is strict, foreign production technology is protected in the form of patent, as the life of the enterprise. The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.

Overview of intelligent high-speed silicon steel sheet shearing line(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.