transformer temperature monitoring system

Since founded, has focused on providing customers with the finest products. Our professional employees are dedicated to satisfying customers' requirements relying on the most advanced equipment and techniques. Moreover, we have set up a service department which is mainly responsible for offering customers prompt and efficient customer service. We are always here to turn your ideas into reality. Want to know more information about our new product transformer temperature monitoring system or our company, welcome to contact us at any minute.
With complete transformer temperature monitoring system production lines and experienced employees, can independently design, develop, manufacture, and test all products in an efficient manner. Throughout the whole process, our QC professionals will supervise each process to ensure product quality. Moreover, our delivery is timely and can meet the needs of every customer. We promise that the products are sent to customers safe and sound. If you have any questions or want to know more about our transformer temperature monitoring system, call us directly.
As a driven company, CANWIN has been developing products on our own on a regular basis, one of which is transformer temperature monitoring system. It is the newest product and bound to bring benefits to customers.
  • Epoxy System For Electrical Composite Parts
    Epoxy System For Electrical Composite Parts
    High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.
  • Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.
  • CANWIN Transformer Core Special Equipment Cut to Length Line
    CANWIN Transformer Core Special Equipment Cut to Length Line
    CAH(23)-400-600-800LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.
  • 200KW 400KWH Containerized Energy Storage System( Industrial Grade)
    200KW 400KWH Containerized Energy Storage System( Industrial Grade)
    200KW/400KWHContainer Energy Storage SystemProduct model: HT-CN-100KW/200KWHProduct Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid.6. So as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.8. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.
  • Canwin Quality CAH(22)-300/400/600DT Manufacturer & electrical equipment suppliers
    Canwin Quality CAH(22)-300/400/600DT Manufacturer & electrical equipment suppliers
    The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.
  • Transformer Lamination Manufacturing Cut to Length Line
    Transformer Lamination Manufacturing Cut to Length Line
    Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers-CANWINThe CANWIN iron core processing center is composed of Siemens motion control system and servo motor, suspended dual robot lamination mechanism, six station servo exchange platform, and dual station logistics channel. Combined with the Keying 1250 type spacer type high-speed longitudinal cutting line, the MES intelligent warehouse system seamlessly connects with the iron core processing center. Effectively solved the problems of only cutting and not stacking horizontal cutting lines in the past, requiring repeated handling by transfer vehicles, troublesome pre positioning of truss mechanical laminations, low work efficiency, large land occupation, and the need for manpower! Especially suitable for standardized production of super enterprises in the future power industry (with massive annual output ).
  • Professional CANWIN-Classical Product CAH(23)400LA Bridge Threading Automatic Column Stacking Cut To Length Line
    Professional CANWIN-Classical Product CAH(23)400LA Bridge Threading Automatic Column Stacking Cut To Length Line
    CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.
  • SCB 20,000 KVa Resin-Casting Dry Type Power Transformer
    SCB 20,000 KVa Resin-Casting Dry Type Power Transformer
    CANWIN Group offers transformers for different applications:• Power distribution general-purpose transformers• Service transformers for electric power stations and other objects• Converter transformers for direct-current drive in metallurgical, drill, gas-and-oil producing and other branches of industry• Тransformers for converter installations of the urban transport (subway, tramway, trolleybus)• Тransformers for converters of the excitation system of turbo and hydro-generatorsDepending on the customer requirements, transformers can be of the following design versions:Left• HV winding inputs are on the left regarding the front (side of the rating plate)Right• HV winding inputs are on the right regarding the front (side of the rating plate)• Up: inputs of the LV and HV windings are on the transformer upper cover• Other design versions are up to the customer request 
  • Epoxy Resin for Other Products
    Epoxy Resin for Other Products
    High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 
  • Professional CANWIN Automatic Cut To Length Lines Machine (CAH(11)-300) manufacturers
    Professional CANWIN Automatic Cut To Length Lines Machine (CAH(11)-300) manufacturers
    Canwin Professional CANWIN Automatic Cut To Length Lines Machine (CAH(11)-300) manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.
  • Foil Winding Machine Used in Oil-immersed Transformer
    Foil Winding Machine Used in Oil-immersed Transformer
    Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.
  • Epoxy Resin For Dry Type Transformer
    Epoxy Resin For Dry Type Transformer
    Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
italiano
français
Español
Deutsch
العربية
Српски
Af Soomaali
Sundanese
Українська
Xhosa
Pilipino
Zulu
O'zbek
Shqip
Slovenščina
Română
lietuvių
Polski
Current language:English