what type of transformer core is most widely used in radiographic equipment

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

Model: CAZJ -1250-10TThe basic engineering of mechanical equipment1.Equipment foundation plan. And the delivery date for 10 working days after signing a contract.2.Buyer is responsible for all equipment foundation engineering construction and supervision.3.Equipment foundation holes are reserved hole to match the anchor hole of equipment base.4.Base hole cement grouting after equipment installation is in charge of the buyer, seller offer foundation bolt by random.Supply power, gas and oil1. Buyer is responsible for a stable power supply to operating station.2. Buyer provide one set of air compressor and cooler by himself.3. Buyer provide gear oil, hydraulic oil, lubricating oil, and seller offer oil brand.4. Buyer will provide requested material for mechanical debugging.Roduction workshop1. Production line processing set- up length is about 14m.2. The production workshop area: length 18 m X width 8 m X high 6 m.3. Equipped with one set of goods crane carrying more than 20 t , and production workshop corollary equipment.4. Production workshop is equipped with lighting equipment, and 42℃ below room temperature environment.Note: We have the final explanation right for this contract specification.

Copper foil has low surface oxygen characteristics and can be attached to a variety of different substrates, such as metal, insulation materials, etc., with a wide temperature range. Mainly used in electromagnetic shielding and antistatic, the conductive copper foil on the substrate surface, combined with the metal substrate, has excellent conductivity, and provides electromagnetic shielding effect. It can be divided into: self-adhesive copper foil, double guide copper foil, single guide copper foil, etc. Electronic grade copper foil (purity more than 99.7%, thickness of 5um-105um) is one of the basic materials of the electronic industry. With the rapid development of the electronic information industry, the use of electronic grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium ion batteries. TV sets, VIDEO recorders, CD players, photocopiers, telephones, heating and cooling air conditioners, automotive electronic components, game machines, etc. The demand for electronic grade copper foil, especially for high performance electronic grade copper foil, is increasing day by day in domestic and foreign markets.

CANWIN 400 High-speed Cutting Line Technical Specification Requirements(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.

CAH(11)-150B: Basic properties:A. Hydraulic single head feeding, unique way of push and pull of material feeding, global initiative (won national invention patent)B. Precise center positioning, electric adjustable width structureC. Can cut edge, stele, yoke, the narrowest can cut 30 mm, the shortest can be cut to 100 mm.D. Use two layers discharge ways, automatic divide material sheet, feeding speed is 35 to 50 pieces per minute.E. This line is design for the smaller power transformer core, efficiency was 2-3 times compare with ordinary cutting line.F. New structure design, use servo swing cutting technology, can cut edge, yoke, stele, 45° parallel sides, 90° angles sheet, especially suitable for small iron core shear.G. During the V punching can satisfied with transverse 3, 5, 7 step shear.

Foil Winding Machine BRJ-1000: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special foil winding in transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally. 

The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.

Canwin Intro to Professional CAH400 Cut To Length Line For Power Transformers manufacturers-CANWIN manufacturers Canwin,We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.Canwin Professional CAH400 Cut To Length Line For Power Transformers manufacturers,We can provide you with power transformer manufacturing equipment and technical services for you to create a strong competitive transformer factoryCanwin Professional Professional CAH400 Cut To Length Line For Power Transformers manufacturers-CANWIN manufacturers,Guangdong CANWIN Automatic equipment co., ltd is one of the largest professional manufacturers of electrical equipment in China and a global leading brand of silicon steel sheet cutting equipment (private enterprise).

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this transformer core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This core slitting machine lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

The handheld fiber laser welder is a new generation of laser welding equipment, which belongs to non-contact welding. The operation process does not require pressure and its working principle is to directly irradiate a high-energy intensity laser beam on the surface of the material. The material is melted inside, and then cooled and crystallized to form a weld through the interaction of the laser and the material.