why are transformer cores laminated

Since founded, has focused on providing customers with the finest products. Our professional employees are dedicated to satisfying customers' requirements relying on the most advanced equipment and techniques. Moreover, we have set up a service department which is mainly responsible for offering customers prompt and efficient customer service. We are always here to turn your ideas into reality. Want to know more information about our new product why are transformer cores laminated or our company, welcome to contact us at any minute.
With complete why are transformer cores laminated production lines and experienced employees, can independently design, develop, manufacture, and test all products in an efficient manner. Throughout the whole process, our QC professionals will supervise each process to ensure product quality. Moreover, our delivery is timely and can meet the needs of every customer. We promise that the products are sent to customers safe and sound. If you have any questions or want to know more about our why are transformer cores laminated, call us directly.
Today is a great day that CANWIN plans to introduce our newest product to the public. It has an official name called why are transformer cores laminated and is supplied at a competitive price.
  • Epoxy Resin for Other Products
    Epoxy Resin for Other Products
    High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 
  • Cut to length ine 3,5,7 Steps Vertical Direction Transformer Core
    Cut to length ine 3,5,7 Steps Vertical Direction Transformer Core
    CAH(22)-300-400-600DT: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that one O punch and one V notch;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.
  • Epoxy Resin for Room Temperature Curing
    Epoxy Resin for Room Temperature Curing
    The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.
  • CANWIN Cut-To-Length line for Separate Cut Yoke and Side Pieces
    CANWIN Cut-To-Length line for Separate Cut Yoke and Side Pieces
    CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.
  • Automation Foil Winding Machine Used in Oil-immersed Transformer
    Automation Foil Winding Machine Used in Oil-immersed Transformer
    Foil Winding Machine BRJ-1000: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special foil winding in transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.
  • High Quality New Design Smart Stacking Robot for power transformers Company - CANWIN Wholesale -CANWIN
    High Quality New Design Smart Stacking Robot for power transformers Company - CANWIN Wholesale -CANWIN
    Siemens series electric two shear four punch, robot stack the whole transformer core, stack 2-6 at a time;This is the new design, not any further news can be introduce. ;This unique machine is prepared to automatically produce open power transformer cores with separated top yoke as well as closed power transformer cores including top yoke. As the line can be used to either stack such cores (with or without top yoke) or separate accurate leg and yoke logs, it provides a lot of flexibility to fulfil the various customer’s needs of a transformer core service center.If you want to know more, pls send email to : info@canwinsg.com 
  • Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.
  • Slitting Line Machine Transformer Motor Industry Metal Coil Cutting
    Slitting Line Machine Transformer Motor Industry Metal Coil Cutting
    Model: CAZJ -1250-10TThe basic engineering of mechanical equipment1.Equipment foundation plan. And the delivery date for 10 working days after signing a contract.2.Buyer is responsible for all equipment foundation engineering construction and supervision.3.Equipment foundation holes are reserved hole to match the anchor hole of equipment base.4.Base hole cement grouting after equipment installation is in charge of the buyer, seller offer foundation bolt by random.Supply power, gas and oil1. Buyer is responsible for a stable power supply to operating station.2. Buyer provide one set of air compressor and cooler by himself.3. Buyer provide gear oil, hydraulic oil, lubricating oil, and seller offer oil brand.4. Buyer will provide requested material for mechanical debugging.Roduction workshop1. Production line processing set- up length is about 14m.2. The production workshop area: length 18 m X width 8 m X high 6 m.3. Equipped with one set of goods crane carrying more than 20 t , and production workshop corollary equipment.4. Production workshop is equipped with lighting equipment, and 42℃ below room temperature environment.Note: We have the final explanation right for this contract specification.
  • SCB 20,000 KVa Resin-Casting Dry Type Power Transformer
    SCB 20,000 KVa Resin-Casting Dry Type Power Transformer
    CANWIN Group offers transformers for different applications:• Power distribution general-purpose transformers• Service transformers for electric power stations and other objects• Converter transformers for direct-current drive in metallurgical, drill, gas-and-oil producing and other branches of industry• Тransformers for converter installations of the urban transport (subway, tramway, trolleybus)• Тransformers for converters of the excitation system of turbo and hydro-generatorsDepending on the customer requirements, transformers can be of the following design versions:Left• HV winding inputs are on the left regarding the front (side of the rating plate)Right• HV winding inputs are on the right regarding the front (side of the rating plate)• Up: inputs of the LV and HV windings are on the transformer upper cover• Other design versions are up to the customer request 
  • 200KW 400KWH Containerized Energy Storage System( Industrial Grade)
    200KW 400KWH Containerized Energy Storage System( Industrial Grade)
    200KW/400KWHContainer Energy Storage SystemProduct model: HT-CN-100KW/200KWHProduct Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid.6. So as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.8. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.
  • CNC Precision Slitting Line Machine CAZJ-1250B-5T
    CNC Precision Slitting Line Machine CAZJ-1250B-5T
    CAZJ-1250B: CNC precision slitting line is mainly used for strip silicon steel sheet coils processed by high-speed precision, mainly consist of:1. Motor Decoiler: 1 set 2. Decoiler trolley: (Assist operation platform): 1 set3. Guard rail/shaft: 2 sets4.1250 type rolling slitting machine(with 07set alloy cutter ): 1 set5.Material photoelectric detection device: 2 set6.Pneumatic tensioner:  1 set7. Motor Recoiler: 1 set8.Electric trolley: 1 set9.Pneumatic system:1 set10.Electrical control system: 1 set
  • The High-speed CTL Machine Cut for Silicon steel Double O-punch
    The High-speed CTL Machine Cut for Silicon steel Double O-punch
    CAH(23)-400DO: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work for York-sheet with two floor stacking;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2-4 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
italiano
français
Español
Deutsch
العربية
Српски
Af Soomaali
Sundanese
Українська
Xhosa
Pilipino
Zulu
O'zbek
Shqip
Slovenščina
Română
lietuvių
Polski
Current language:English