robot core stacking

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally. 

Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.

The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this transformer core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This core slitting machine lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

Siemens series electric two shear four punch, robot stack the whole transformer core, stack 2-6 at a time;This is the new design, not any further news can be introduce. ;This unique machine is prepared to automatically produce open power transformer cores with separated top yoke as well as closed power transformer cores including top yoke. As the line can be used to either stack such cores (with or without top yoke) or separate accurate leg and yoke logs, it provides a lot of flexibility to fulfil the various customer’s needs of a transformer core service center.If you want to know more, pls send email to : info@canwinsg.com 

Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

CANWIN 400 High-speed Cutting Line Technical Specification Requirements(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.

dry type transformer is widely used in local lighting, high-rise buildings, airports, terminals CNC mechanical equipment and other places, simply said dry transformer refers to the core and winding are not impregnated in the transformer insulation oil.

The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.

1) Two sets of V-shaped shearing machines and three sets of hole punching machines. The three punching mechanism adopts a chasing shear design, which can move vertically and horizontally, automatically arrange positions, and easily achieve three simultaneous steps and five synchronous cutting;2) The material handling part adopts a gantry type servo belt mechanism, which can automatically rise and fall with the change of stacking height;3) Equipped with a stacking electric trolley, the trolley can move left and right, the upper stacking platform can be lifted and lowered, and even workshops without truss cars can produce iron cores!4) The shear bed section has added a four wheel drive micro tension servo pulling mode, and cutting of materials with different thicknesses of 0.15-0.35 mm does not require changing the cutting parameters!

YBM (P) series box transformer substation (hereinafter referred to as box transformer) is a compact complete set of power distribution equipment composed of high-voltage power equipment, power transformer, low-voltage electrical equipment and auxiliary equipment.