transformer lamination stacking machine

A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.

The consolidated experience in the production of resin transformers and the remarkable quality acquired has allowed the marketing, in addition to the complete transformer, also of low and medium voltage impregnated or encapsulated coils. The design for creation of the core can be provided by CANWIN or on the customer’s indications. This allows us to guarantee a reduction in transportation, import and construction costs of the transformer on site in distant countries.

Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

CAH(23)-400DO: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work for York-sheet with two floor stacking；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2-4 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

The inner and outer surfaces of the coil are reinforced by glass fiber mesh cloth.After circuit processing, the temperature of each phase winding is displayed on the control board. It has the function of temperature setting, manual/automatic start and stop of fan, alarm of over temperature sound and light signal and automatic trip of over temperature, etc.

Copper foil has low surface oxygen characteristics and can be attached to a variety of different substrates, such as metal, insulation materials, etc., with a wide temperature range. Mainly used in electromagnetic shielding and antistatic, the conductive copper foil on the substrate surface, combined with the metal substrate, has excellent conductivity, and provides electromagnetic shielding effect. It can be divided into: self-adhesive copper foil, double guide copper foil, single guide copper foil, etc. Electronic grade copper foil (purity more than 99.7%, thickness of 5um-105um) is one of the basic materials of the electronic industry. With the rapid development of the electronic information industry, the use of electronic grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium ion batteries. TV sets, VIDEO recorders, CD players, photocopiers, telephones, heating and cooling air conditioners, automotive electronic components, game machines, etc. The demand for electronic grade copper foil, especially for high performance electronic grade copper foil, is increasing day by day in domestic and foreign markets.

The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch；Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.

Insulation grade F, H.It has the ability of anti-electromagnetic interference stipulated by the state. At the same time, reserved intelligent computer interface, remote control. 

1) Two sets of V-shaped shearing machines and three sets of hole punching machines. The three punching mechanism adopts a chasing shear design, which can move vertically and horizontally, automatically arrange positions, and easily achieve three simultaneous steps and five synchronous cutting;2) The material handling part adopts a gantry type servo belt mechanism, which can automatically rise and fall with the change of stacking height;3) Equipped with a stacking electric trolley, the trolley can move left and right, the upper stacking platform can be lifted and lowered, and even workshops without truss cars can produce iron cores!4) The shear bed section has added a four wheel drive micro tension servo pulling mode, and cutting of materials with different thicknesses of 0.15-0.35 mm does not require changing the cutting parameters!