transformer that increases voltage

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

10KV intelligent box type switcher is a new generation of load switcher, vacuum breaker and other switch elements, suitable for distribution automation, that is, compact and scalable distribution equipment. It has the advantages of oil-free, multi-combination, maintenance, modular, corrosion resistance, high reliability, strong adaptability to the environment and so on. In and out of the loop according to the requirements of users, you can meet the manual, electric operation, circuit breaker circuit by matching the corresponding intelligent controller and other related equipment.

A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.

500KW/1MWH Containerized Energy Storage SystemProduct model: HT-CN-500KW/1MWHProduct Features1. Support up to 2*500KW bi-directional inverters in direct parallel.2. Interface with dispatching system.3. Black-start function of full station load.4. Automatic switching function between grid connected and off grid status.5. Battery management system (BMS) for efficient management of battery clusters.6. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.7. The remote cloud platform and mobile terminal can optimize the system through big data analysis, while reversing the relevant information and operation status to the users’ mobile phone.

CANWIN Group offers transformers for different applications:• Power distribution general-purpose transformers• Service transformers for electric power stations and other objects• Converter transformers for direct-current drive in metallurgical, drill, gas-and-oil producing and other branches of industry• Тransformers for converter installations of the urban transport (subway, tramway, trolleybus)• Тransformers for converters of the excitation system of turbo and hydro-generatorsDepending on the customer requirements, transformers can be of the following design versions:Left• HV winding inputs are on the left regarding the front (side of the rating plate)Right• HV winding inputs are on the right regarding the front (side of the rating plate)• Up: inputs of the LV and HV windings are on the transformer upper cover• Other design versions are up to the customer request 

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

Overview of intelligent high-speed silicon steel sheet shearing line(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.

CAH(11)-150B: Basic properties:A. Hydraulic single head feeding, unique way of push and pull of material feeding, global initiative (won national invention patent)B. Precise center positioning, electric adjustable width structureC. Can cut edge, stele, yoke, the narrowest can cut 30 mm, the shortest can be cut to 100 mm.D. Use two layers discharge ways, automatic divide material sheet, feeding speed is 35 to 50 pieces per minute.E. This line is design for the smaller power transformer core, efficiency was 2-3 times compare with ordinary cutting line.F. New structure design, use servo swing cutting technology, can cut edge, yoke, stele, 45° parallel sides, 90° angles sheet, especially suitable for small iron core shear.G. During the V punching can satisfied with transverse 3, 5, 7 step shear.

Definition of electrical steelElectrical steel, also known as silicon steel sheet, is an important soft magnetic alloy indispensable to power, electronics and military industry, as well as the largest output of metal functional materials, mainly used as the iron core of various motors, generators and transformers. Its production process is complex, manufacturing technology is strict, foreign production technology is protected in the form of patent, as the life of the enterprise. The manufacturing technology and product quality of electrical steel plate is one of the important signs to measure the development level of special steel production and science and technology in a country. At present, the quantity, quality and specification of cold rolled electrical steel in China cannot meet the needs of energy (power) industry development, and there is a big gap between China and Japan in terms of production technology, equipment, management and scientific research.

dry type transformer is a completely stationary solid-state device and it needs less maintenance to provide problem-free service. This transformer doesn’t contain any moving parts. Not like liquid fill transformers, this transformer use simply high-temperature insulation systems as they are very safe environmentally.