what happens when a transformer leaks oil

CANWIN has set up a team which is mainly engaged in product development. Thanks to their efforts, we have successfully developed what happens when a transformer leaks oil and planned to sell it to the overseas markets.
With complete what happens when a transformer leaks oil production lines and experienced employees, can independently design, develop, manufacture, and test all products in an efficient manner. Throughout the whole process, our QC professionals will supervise each process to ensure product quality. Moreover, our delivery is timely and can meet the needs of every customer. We promise that the products are sent to customers safe and sound. If you have any questions or want to know more about our what happens when a transformer leaks oil, call us directly.
CANWIN is an enterprise that pays close attention to improving manufacturing technologies and R&D strength. We are equipped with advanced machines and have set up several departments to satisfy the different needs of a large number of customers. For example, we have our own service department which can provide customers with highly efficient after-sales service. The service members are always standby to serve customers from different countries and regions, and willing to answer all questions. If you are seeking business opportunities or have an interest in our what happens when a transformer leaks oil, contact us.
  • Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060
    Chemical composition of aluminum foil 1060Aluminum Al: 99.60, Silicon Si: 0.25, Copper Cu: 0.05, Magnesium Mg :0.03, Zinc Zn: 0.05, Manganese Mn :0.03, Titanium Ti :0.03, vanadium V: 0.05, Fe: 0.350, note: Single :0.03.
  • Self-adhesive Copper Foil Single/double Guide Copper Foil
    Self-adhesive Copper Foil Single/double Guide Copper Foil
    Copper foil has low surface oxygen characteristics and can be attached to a variety of different substrates, such as metal, insulation materials, etc., with a wide temperature range. Mainly used in electromagnetic shielding and antistatic, the conductive copper foil on the substrate surface, combined with the metal substrate, has excellent conductivity, and provides electromagnetic shielding effect. It can be divided into: self-adhesive copper foil, double guide copper foil, single guide copper foil, etc. Electronic grade copper foil (purity more than 99.7%, thickness of 5um-105um) is one of the basic materials of the electronic industry. With the rapid development of the electronic information industry, the use of electronic grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium ion batteries. TV sets, VIDEO recorders, CD players, photocopiers, telephones, heating and cooling air conditioners, automotive electronic components, game machines, etc. The demand for electronic grade copper foil, especially for high performance electronic grade copper foil, is increasing day by day in domestic and foreign markets.
  • The High-speed CTL Machine Cut for Silicon steel Double O-punch
    The High-speed CTL Machine Cut for Silicon steel Double O-punch
    CAH(23)-400DO: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work for York-sheet with two floor stacking;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2-4 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.
  • Epoxy Resin for Room Temperature Curing
    Epoxy Resin for Room Temperature Curing
    The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.
  • Quality CANWIN 400 High-speed Cutting Line Technical Specification Requirements Manufacturer | CANWIN
    Quality CANWIN 400 High-speed Cutting Line Technical Specification Requirements Manufacturer | CANWIN
    Overview of intelligent high-speed silicon steel sheet shearing line(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.
  • Epoxy Resin For Dry Type Transformer
    Epoxy Resin For Dry Type Transformer
    Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.
  • Canwin Quality CAH(22)-300/400/600DT Manufacturer & electrical equipment suppliers
    Canwin Quality CAH(22)-300/400/600DT Manufacturer & electrical equipment suppliers
    The cut to length line li is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet. The special point of this line is that one O punch and one V notch;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly. This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.
  • CANWIN 400 intelligent high-speed silicon steel sheet shearing line
    CANWIN 400 intelligent high-speed silicon steel sheet shearing line
    CANWIN 400 High-speed Cutting Line Technical Specification Requirements(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.
  • Epoxy Resin for Other Products
    Epoxy Resin for Other Products
    High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 
  • Medium and low voltage  windings
    Medium and low voltage windings
    The consolidated experience in the production of resin transformers and the remarkable quality acquired has allowed the marketing, in addition to the complete transformer, also of low and medium voltage impregnated or encapsulated coils. The design for creation of the core can be provided by CANWIN or on the customer’s indications. This allows us to guarantee a reduction in transportation, import and construction costs of the transformer on site in distant countries.
  • Epoxy Resin For Insulation Parts
    Epoxy Resin For Insulation Parts
    The inner and outer surfaces of the coil are reinforced by glass fiber mesh cloth.After circuit processing, the temperature of each phase winding is displayed on the control board. It has the function of temperature setting, manual/automatic start and stop of fan, alarm of over temperature sound and light signal and automatic trip of over temperature, etc.
  • Professional Best Quality Dry Type Transformer manufacturers-Canwin Automatic
    Professional Best Quality Dry Type Transformer manufacturers-Canwin Automatic
    dry type transformer is widely used in local lighting, high-rise buildings, airports, terminals CNC mechanical equipment and other places, simply said dry transformer refers to the core and winding are not impregnated in the transformer insulation oil.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
italiano
français
Español
Deutsch
العربية
Српски
Af Soomaali
Sundanese
Українська
Xhosa
Pilipino
Zulu
O'zbek
Shqip
Slovenščina
Română
lietuvių
Polski
Current language:English