transformer efficiency

CANWIN has been operating with the aim of becoming a professional and well-reputed enterprise. We have a strong R&D team that supports our continuous development of new products, such as transformer efficiency. We pay close attention to customer service so we've set up a service center. Each staff working in the center is highly responsive to customers' requests and can track the order status at any time. Our everlasting tenet is to provide customers with cost-effective and high-quality products, and to create values for customers. We would like to cooperate with customers throughout the whole world. Contact us to get more details.
With complete transformer efficiency production lines and experienced employees, can independently design, develop, manufacture, and test all products in an efficient manner. Throughout the whole process, our QC professionals will supervise each process to ensure product quality. Moreover, our delivery is timely and can meet the needs of every customer. We promise that the products are sent to customers safe and sound. If you have any questions or want to know more about our transformer efficiency, call us directly.
CANWIN has been focusing on developing products regularly, of which transformer efficiency is the newest. It is the newest series of our company and is expected to surprise you.
  • CANWIN 400 intelligent high-speed silicon steel sheet shearing line
    CANWIN 400 intelligent high-speed silicon steel sheet shearing line
    CANWIN 400 High-speed Cutting Line Technical Specification Requirements(1)     The equipment adopts a central positioning system and is equipped with two shears and five punches:(2)     One 45º shearing machine and one 135º shearing machine;(3)     Two V punching and shearing machines use servo motor control systems to move forward and backward and left and right;(4)     Three punching machines use linear motor control systems to move left and right;(5)     Three punching machines, V punching and shearing machines and one direct shear can cut simultaneously.(6)     The equipment is a high-speed shearing model, regardless of punching or not, the shearing speed of the 1-meter-long piece (side piece + yoke piece; side piece + side piece) can reach more than 80 pieces/min; The cutting speed reaches 60 pieces/min.(7)     Adopt back-suction neat material sorting system, which can realize neat or step-by-step material sorting.
  • CANWIN Cut-To-Length line for Separate Cut Yoke and Side Pieces
    CANWIN Cut-To-Length line for Separate Cut Yoke and Side Pieces
    CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.
  • Epoxy System For Electrical Composite Parts
    Epoxy System For Electrical Composite Parts
    High and low voltage winding according to the requirements of heat dissipation is provided with a longitudinal ventilation airway.
  • Professional CANWIN-Classical Product CAH(23)400LA Bridge Threading Automatic Column Stacking Cut To Length Line
    Professional CANWIN-Classical Product CAH(23)400LA Bridge Threading Automatic Column Stacking Cut To Length Line
    CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for transformer lamination manufacturing.
  • We are a professional manufacturer of transformer cores
    We are a professional manufacturer of transformer cores
    CANWIN's transformer core is made of high magnetic conductivity high-quality grain oriented cold rolled silicon steel sheets, with 45 ° fully oblique step seams.The iron core adopts a special square tube pull plate structure, the core column is bound with insulation tape, and the surface of the iron core is coated with special resin to prevent moisture and rust, effectively reducing no-load loss, no-load current, and iron core noise.Built Cores  compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.CANWIN summarizes the defects of past products, and continuously improves them. The specifications of Built Cores can be customized according to your needs.
  • Medium and low voltage  windings
    Medium and low voltage windings
    The consolidated experience in the production of resin transformers and the remarkable quality acquired has allowed the marketing, in addition to the complete transformer, also of low and medium voltage impregnated or encapsulated coils. The design for creation of the core can be provided by CANWIN or on the customer’s indications. This allows us to guarantee a reduction in transportation, import and construction costs of the transformer on site in distant countries.
  • Transformer Lamination Manufacturing Cut to Length Line
    Transformer Lamination Manufacturing Cut to Length Line
    Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers-CANWINThe CANWIN iron core processing center is composed of Siemens motion control system and servo motor, suspended dual robot lamination mechanism, six station servo exchange platform, and dual station logistics channel. Combined with the Keying 1250 type spacer type high-speed longitudinal cutting line, the MES intelligent warehouse system seamlessly connects with the iron core processing center. Effectively solved the problems of only cutting and not stacking horizontal cutting lines in the past, requiring repeated handling by transfer vehicles, troublesome pre positioning of truss mechanical laminations, low work efficiency, large land occupation, and the need for manpower! Especially suitable for standardized production of super enterprises in the future power industry (with massive annual output ).
  • Epoxy Resin For Dry Type Transformer
    Epoxy Resin For Dry Type Transformer
    Epoxy resin dry transformer small volume, light weight. Epoxy resin dry transformer is equipped with low noise amplitude-flow fan, which can reduce winding temperature, improve load capacity and prolong transformer life after starting. When forced air cooling is used, the rated capacity can be increased by 40-50%.
  • High Quality Smart Robot Cut To Length Line + E-stacker Power Transformer Production Line Made By CANWIN China
    High Quality Smart Robot Cut To Length Line + E-stacker Power Transformer Production Line Made By CANWIN China
    Five years of hard work, Finally Success! The first China Made robot automatic laminated horizontal cutting line in CANWIN successfully developed! A dual-robot six-station automatic laminating Cut to length line. This product is the first in the world and the domestic first. Its key technology is to grab five pieces at a time (two robots are equivalent to ten pieces at a time). Six transformer cores can be stacked [multiple invention patents have been applied for]; This equipment has three sets of systems, which can stack the whole transformer core, 1+E, five columns. 
  • Automation Foil Winding Machine Used in Oil-immersed Transformer
    Automation Foil Winding Machine Used in Oil-immersed Transformer
    Foil Winding Machine BRJ-1000: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special foil winding in transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.
  • Epoxy Resin for Other Products
    Epoxy Resin for Other Products
    High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 
  • CANWIN Transformer Core Cut to Lengt Line Equipment CAH(22)-400DT
    CANWIN Transformer Core Cut to Lengt Line Equipment CAH(22)-400DT
    The cut-to-length-line is a special equipment for the production of transformer core cutting machine, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this transformer core cutting line is that one O punch and one V notch;Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this core cutting line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cutting machines lines adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Chat
Now

Send your inquiry

Choose a different language
English
Tiếng Việt
Türkçe
ภาษาไทย
русский
Português
한국어
日本語
italiano
français
Español
Deutsch
العربية
Српски
Af Soomaali
Sundanese
Українська
Xhosa
Pilipino
Zulu
O'zbek
Shqip
Slovenščina
Română
lietuvių
Polski
Current language:English