core cutting line

CAZJ-1250B: CNC precision slitting line is mainly used for strip silicon steel sheet coils processed by high-speed precision, mainly consist of:1. Motor Decoiler: 1 set 2. Decoiler trolley: (Assist operation platform): 1 set3. Guard rail/shaft: 2 sets4.1250 type rolling coil slitting machine(with 07set alloy cutter ): 1 set5.Material photoelectric detection device: 2 set6.Pneumatic tensioner:  1 set7. Motor Recoiler: 1 set8.Electric trolley: 1 set9.Pneumatic system:1 set10.Electrical control system: 1 set

A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.

Foil Winding Machine BRJ-1000: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special foil winding in transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

1) Two sets of V-shaped shearing machines and three sets of hole punching machines. The three punching mechanism adopts a chasing shear design, which can move vertically and horizontally, automatically arrange positions, and easily achieve three simultaneous steps and five synchronous cutting;2) The material handling part adopts a gantry type servo belt mechanism, which can automatically rise and fall with the change of stacking height;3) Equipped with a stacking electric trolley, the trolley can move left and right, the upper stacking platform can be lifted and lowered, and even workshops without truss cars can produce iron cores!4) The shear bed section has added a four wheel drive micro tension servo pulling mode, and cutting of materials with different thicknesses of 0.15-0.35 mm does not require changing the cutting parameters!

Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers-CANWINThe CANWIN iron core processing center is composed of Siemens motion control system and servo motor, suspended dual robot lamination mechanism, six station servo exchange platform, and dual station logistics channel. Combined with the Keying 1250 type spacer type high-speed longitudinal cutting line, the MES intelligent warehouse system seamlessly connects with the iron core processing center. Effectively solved the problems of only cutting and not stacking horizontal cutting lines in the past, requiring repeated handling by transfer vehicles, troublesome pre positioning of truss mechanical laminations, low work efficiency, large land occupation, and the need for manpower! Especially suitable for standardized production of super enterprises in the future power industry (with massive annual output ).

The high and low voltage windings are all cast epoxy resin and cured in vacuum, forming a high strength FRP body structure.The temperature sensor PT100 platinum resistor is inserted into the low-voltage winding to obtain the temperature signal.

CAH(23)-400LA: The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this line is that two O punch and one V notch can work at the same time to produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 20 columns and used for the silicon steel lamination core assembly.This production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: This machine is special for silicon steel transformer laminations manufacturing.

Main features of the equipment1. The operation mode of the hand-held welding gun can weld any part of the workpiece at any Angle.2. Ergonomic design, small size, light weight, flexible and convenient operation.3. Auslese welding nozzle material to avoid scratching the workpiece surface.4. A variety of welding nozzle optional, easy to realize the welding operation of different products.5. Equipped with safety circuit to avoid accidental light, safer operation.6. Hand-held welding head can choose switch button light, also can use foot trigger light.7. Suitable for small batch multi-angle sheet metal hardware welding.8. Wear protective glasses or masks when welding.

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

China's first robot laminating horizontal china automatic cut to length line in Guangdong CANWIN successfully developed!  The equipment adopts double-layer servo AI intelligent software development, five pieces of a stack, robot extraction five pieces at a time;  This equipment has three sets of systems, can stack the whole transformer core, 1+E, five columns;  This technology subverts the traditional lamination process and reaches the international advanced level!  Canwin Customized AI Smart Robot Cut To Length Line + manufacturers From China,We have 20 years of marketing experience and a 200,000 square foot modern manufacturing center.Canwin Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers,The company is a key enterprise in the field of electric power electrical equipment manufacturing in China, and a core professional equipment supplier of state grid, China southern power grid and many listed companies in the electric power industry.

The consolidated experience in the production of resin transformers and the remarkable quality acquired has allowed the marketing, in addition to the complete transformer, also of low and medium voltage impregnated or encapsulated coils. The design for creation of the core can be provided by CANWIN or on the customer’s indications. This allows us to guarantee a reduction in transportation, import and construction costs of the transformer on site in distant countries.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.