transformer winding temperature range

100KW/200KWH Containerized Energy Storage SystemProduct model: HT-CN-100KW/200KWH Product Features1. Black-start function of full station load.2. Automatic switching function between grid connected and off grid status.3. Regulate reactive power to achieve the function of reactive power compensation.4. Battery management system (BMS) for efficient management of battery clusters.5. Energy management system, which uniformly allocates and manages the wind energy, photovoltaic, power grid, battery system and distribution system of micro grid, so as to achieve energy efficiency and high-quality energy allocation.6. The fast charging and slow charging functions of electric vehicles are operated through mobile terminals which are simple, convenient and fast, and contribute to green travel.

CANWIN's transformer core is made of high magnetic conductivity high-quality grain oriented cold rolled silicon steel sheets, with 45 ° fully oblique step seams.The iron core adopts a special square tube pull plate structure, the core column is bound with insulation tape, and the surface of the iron core is coated with special resin to prevent moisture and rust, effectively reducing no-load loss, no-load current, and iron core noise.Built Cores  compared with similar products on the market, it has incomparable outstanding advantages in terms of performance, quality, appearance, etc., and enjoys a good reputation in the market.CANWIN summarizes the defects of past products, and continuously improves them. The specifications of Built Cores can be customized according to your needs.

Slitting line equipment mainly includes the following:Loading trolley, double support uncoiler, feeding device, traction leveling machine, trimming shearing machine, deviation correction feeding device, longitudinal shear line, waste edge winder, feed rack, pre separation device, tensioner, feeding roller, winding shearing machine, steering drum, rear axle, discharge trolley, winding auxiliary support, hydraulic system and electrical system, etc.The materials that can be processed by longitudinal shear equipment include cold-rolled plate, stainless steel plate, aluminum plate, galvanized plate and color coated plate. However, for different materials, there are certain differences in the strength of blade materials, so as to obtain good cutting effect.

A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.

Model: CAZJ -1250-10TThe basic engineering of mechanical equipment1.Equipment foundation plan. And the delivery date for 10 working days after signing a contract.2.Buyer is responsible for all equipment foundation engineering construction and supervision.3.Equipment foundation holes are reserved hole to match the anchor hole of equipment base.4.Base hole cement grouting after equipment installation is in charge of the buyer, seller offer foundation bolt by random.Supply power, gas and oil1. Buyer is responsible for a stable power supply to operating station.2. Buyer provide one set of air compressor and cooler by himself.3. Buyer provide gear oil, hydraulic oil, lubricating oil, and seller offer oil brand.4. Buyer will provide requested material for mechanical debugging.Roduction workshop1. Production line processing set- up length is about 14m.2. The production workshop area: length 18 m X width 8 m X high 6 m.3. Equipped with one set of goods crane carrying more than 20 t , and production workshop corollary equipment.4. Production workshop is equipped with lighting equipment, and 42℃ below room temperature environment.Note: We have the final explanation right for this contract specification.

High and low voltage windings are all wrapped with copper tape (foil).Temperature display controller can be installed on epoxy resin dry transformer to display and control the operating temperature of transformer winding to ensure the normal service life of transformer. 

Foil Winding Machine BRJ-1400-2: This foil winding machine has unique appearance, convenient operation, intuitive data display, high degree of automation, and is well received by users. This foil winding machine is widely used in oil-immersed transformer, dry transformer, special transformer and reactor production required.Foil coils are of different thicknesses copper or aluminum foil as a conductor, with wide ribbon insulation material as the insulation between layers, with narrow ribbon insulation material as the end insulation, completed winding one time, forming a coil. The inner and outer leads of the coil are welded and wrapped up at the same time.

Professional Customized AI Smart Robot Cut To Length Line manufacturers From China manufacturers-CANWINThe CANWIN iron core processing center is composed of Siemens motion control system and servo motor, suspended dual robot lamination mechanism, six station servo exchange platform, and dual station logistics channel. Combined with the Keying 1250 type spacer type high-speed longitudinal cutting line, the MES intelligent warehouse system seamlessly connects with the iron core processing center. Effectively solved the problems of only cutting and not stacking horizontal cutting lines in the past, requiring repeated handling by transfer vehicles, troublesome pre positioning of truss mechanical laminations, low work efficiency, large land occupation, and the need for manpower! Especially suitable for standardized production of super enterprises in the future power industry (with massive annual output ).

CAH(11)-150B: Basic properties:A. Hydraulic single head feeding, unique way of push and pull of material feeding, global initiative (won national invention patent)B. Precise center positioning, electric adjustable width structureC. Can cut edge, stele, yoke, the narrowest can cut 30 mm, the shortest can be cut to 100 mm.D. Use two layers discharge ways, automatic divide material sheet, feeding speed is 35 to 50 pieces per minute.E. This line is design for the smaller power transformer core, efficiency was 2-3 times compare with ordinary cutting line.F. New structure design, use servo swing cutting technology, can cut edge, yoke, stele, 45° parallel sides, 90° angles sheet, especially suitable for small iron core shear.G. During the V punching can satisfied with transverse 3, 5, 7 step shear.

CAH(23)-300/400/600DV:  Cut to length lines are designed for sheet metal production by leveling and cutting a mother coil into cross sections, creating completely flat formats that are properly stacked. The basic process of cut to length lines comprises unwinding, levelling, cross cutting, stacking and packaging. The cut-to-length-line is a special equipment for the production of transformer core, is our latest generation of cross shear line. This cut to length production line is used for shearing, O punching and V notch of transformer core sheet.The special point of this ctl line is that one O punch and two V notch can work for York-sheet with two floor stacking; Can produce transformer core pieces with 3, 5, 7 steps in vertical direction and 3, 5, 7 steps in horizontal direction.After the coil material of silicon steel sheet is punched and cut into certain shape and size by this cut to length production line, the classification and finishing work is completed at the end of the production line, and it is automatically stacked into 2 columns and used for the core assembly.This cut to length production line adopts advanced control system to ensure the accurate and stable operation of the production line. Embedded operating terminal can complete parameter setting quickly and conveniently.Application: Cut to Length Line machines are used for uncoiling, straightening of sheets and automatically feeding or even cutting in required lengths of sheets. Our product makes sure that the process is accurate and better shearing is done on processing line.This machine is special for transformer lamination manufacturing.

Copper foil has low surface oxygen characteristics and can be attached to a variety of different substrates, such as metal, insulation materials, etc., with a wide temperature range. Mainly used in electromagnetic shielding and antistatic, the conductive copper foil on the substrate surface, combined with the metal substrate, has excellent conductivity, and provides electromagnetic shielding effect. It can be divided into: self-adhesive copper foil, double guide copper foil, single guide copper foil, etc. Electronic grade copper foil (purity more than 99.7%, thickness of 5um-105um) is one of the basic materials of the electronic industry. With the rapid development of the electronic information industry, the use of electronic grade copper foil is increasing. The products are widely used in industrial calculators, communication equipment, QA equipment, lithium ion batteries. TV sets, VIDEO recorders, CD players, photocopiers, telephones, heating and cooling air conditioners, automotive electronic components, game machines, etc. The demand for electronic grade copper foil, especially for high performance electronic grade copper foil, is increasing day by day in domestic and foreign markets.

CAZJ-1250B: CNC precision slitting line is mainly used for strip silicon steel sheet coils processed by high-speed precision, mainly consist of:1. Motor Decoiler: 1 set 2. Decoiler trolley: (Assist operation platform): 1 set3. Guard rail/shaft: 2 sets4.1250 type rolling coil slitting machine(with 07set alloy cutter ): 1 set5.Material photoelectric detection device: 2 set6.Pneumatic tensioner:  1 set7. Motor Recoiler: 1 set8.Electric trolley: 1 set9.Pneumatic system:1 set10.Electrical control system: 1 set