Ikhwalithi ye-CANWIN 400 Umshini Wokusika Umshini Onesivinini esikhulu Umkhiqizi Wezimfuneko Zezicaciso Zobuchwepheshe Umkhiqizi

Ulwazi Lomkhiqizo

 

  

Izimo zobuchwepheshe zomugqa wokugunda weshidi lensimbi we-silicon ohlakaniphile

(1) Izimfuneko zamaroli wezinto ezisetshenziswa kulo mugqa wokukhiqiza:

I-Burr: ≤0.02mm;

Ukuchezuka kwe-S degree: indlela eyodwa ≤0.2mm/2m;

(2) Ububanzi bokucubungula:

Ubukhulu beshidi: 0.18 ~ 0.35mm;

Ububanzi besiqephu: umugqa we-400-cut-cut, ububanzi 60--440mm;

Ubude befilimu: Ngomugqa wokusika onqamulayo ongu-400: 450—1750mm; (umugqa ophakathi)

Ububanzi bokushaya ￠8 ~20mm

(3) Imingcele yomshini wokukhulula:

Inani lamakhanda: amakhanda ama-2, ikhanda ngalinye lithwele amathani ayi-2.5

Usayizi wekhoyili; ububanzi obukhulu buyi-450mm, ububanzi obungaphandle obukhulu buyi-1200mm;

Imodi yamandla: i-hydraulic tensioning, ukujikeleza okuzenzakalelayo nokuguqulwa;

Ukunwetshwa nobubanzi bokufinyeza kwekhanda elivulayo: 470~520mm.

(4) Imingcele eyinhloko yokugunda imishini:

Ukubekezelela ubude: ± 0.15mm/1500mm;

Ukubekezelela i-engeli: ± 0.01 °;

I-scissors burr: ≤0.02mm;

isivinini sokudla esiphezulu: 216m/min;

umthamo wokufaka usuwonke: mayelana ne-50Kw;

(5) Izimo zokusebenza:

Izinga lokushisa alikho ngaphezu kuka-45°C; ukushintshashintsha kwamandla kungu-380V±10%; imvamisa ingu-50Hz ± 2%;

Imisebenzi kanye nezici zomugqa wokugunda weshidi lensimbi we-silicon ohlakaniphile

(1) Into esetshenziswayo iyishidi lensimbi ye-silicon ehlakaniphile yomugqa wokugunda ngesivinini esikhulu , futhi ijubane lokugunda lamashidi anobude bemitha elingu-1 lingafinyelela ngaphezu kwamashidi angu-80/min. Ulayini wokusika usetshenziselwa ikakhulukazi ukugunda ikhoyili yensimbi kusukela ekuwohlokeni, ukuphakela, ukugunda ikhanda, iluphu, ukusika kuye kokuhlehla.

(2) Inomsebenzi wokusika wesinyathelo esiqondile nesivundlile.

(3) Inomsebenzi wokubhoboza nokusika.

(4) Ifakwe uhla olugcwele lwemisebenzi yokugunda, enenzuzo ekuthuthukiseni ukusebenza okuyisisekelo.

(5) Yamukela isistimu yokuhlunga impahla edonsa ingemuva, ene-palletizing ehlanzekile, izinyathelo ezintathu, izinyathelo ezinhlanu kanye nemisebenzi yezinyathelo eziyisikhombisa.

(6) Konke ukunyakaza kokubhoboza, okuphambanayo nokwesikhathi eside komshini wokubhoboza nokugunda kuqhutshwa ama-servo motors futhi kunohlelo lokulawula oluhlakaniphile, okwenza ukusebenza kube lula nokwethenjelwa.

(7) Ifakwe i-trolley yokulayisha kagesi ukuze igweme ingozi yokushayela nokuphakamisa.

(8) Umshini wokuvula umoya usebenzisa isistimu yokulawula amanzi ukuze uqinise ngokuzenzakalelayo umqulu futhi uzungezisa ikhanda lomshini ovula umoya. Isakhiwo esiyingqayizivele se-tie rod siqeda isidingo samajoyinti ajikelezayo we-hydraulic, okuvumela abasebenzisi ukuthi bagweme izinkinga zokuvuza kwamafutha futhi banciphise izindleko zokulondoloza.

(9) Isistimu yokuqaqa umoya isebenzisa amasethi amaningi okushintsha kwesithombe sikagesi ukuze ilawule isivinini futhi inomsebenzi oguquguqukayo wokusheshisa nokunciphisa amandla.

(10) Uhlelo lokuphakelayo lunomsebenzi wokuqapha nokuvala amashidi amaphutha (imibimbi, njll.).

(11) Ithrekhi yokuthutha amashidi isebenzisa isakhiwo sokuhlanganisa esivulekile nesinembayo, esilungele ukuhlanzwa nokususa amaphutha; i-ceramic bearing positioning, i-high metal surface finish, igwema ngokuphumelelayo ukulimala kwe-silicon steel sheet; ojantshi beziqondiso eziphakelayo, ojantshi beziqondiso zesigaba sepunch, ojantshi beziqondiso zesigaba sokugunda, amabhere I-conductive mechanism ingumzila wesitimela ohunyushwe ngezinsimbi zomhlahlandlela we-carbide. Ibha yethrekhi iklanywe njengezindawo ezimbili zokusebenza, ezingasetshenziswa ngokuphindaphindiwe futhi kulula ukushintshwa, kunciphisa izindleko zokunakekelwa komsebenzisi wemishini.

(12) Ifakwe ngaphambili nangemuva indlela yokudlulisa izigaba ezimbili, engathutha izinto ngendlela efanayo futhi igweme amagagasi ekudluliseni izinto zeshidi, okungathuthukisi nje ukunemba kokusika, kodwa futhi kunciphisa umonakalo wezinto zeshidi ezibangelwa ukungqubuzana.

(13) Yamukela ithebula lokuphuma kwe-roller kagesi wonke, elingakwazi ukubona ukuphuma kwezinto eziqediwe ngaphandle kokumisa Umshini Wokusika;

(14) Kusungulwe indlela yokuthutha imfucuza ukuze kube lula ukutholwa kokushaywa nokugunda imfucuza.

(15) Izinto zokusebenza zamukela uhlelo lokulawula umkhiqizo ophezulu kanye nesistimu ye-servo yakwa-Siemens, eJalimane.

(16) Isixhumi esibonakalayo sokusebenza komuntu, imodeli yesixhumi esibonakalayo se-anthropomorphic, kulula ukuyisebenzisa, londoloza ngokuzenzakalelayo uhlelo locezu.

(17) Izinkinobho zokulawula ezidingekayo zisethwe ezindaweni ezifanele, ezilungele ukulawula okokusebenza eduze.

18 futhi unciphise isikhathi sokuphumula.

19 umsebenzi wesikhumbuzi wokulungisa okokusebenza, futhi ingasetha inombolo yezikhathi nesikhathi ngokwayo. Ngemva kokufinyelela inani elimisiwe, umuntu ogunyaziwe angakwazi ukulisetha kabusha mathupha.

20

Izinzuzo zenkampani

Izitifiketi kanye Namalungelo Obunikazi

Imibuzo Evame Ukubuzwa mayelana nokwenziwa ikhoyili ibe yinde

• Unyaka ususunguliwe
  --
• Uhlobo lwebhizinisi
  --
• Izwe / Isifunda
  --
• Imboni Eyinhloko
  --
• Imikhiqizo eyinhloko
  --
• I-Enterprise Lebird
  --
• Inani labasebenzi
  --
• Inani lokukhipha lonyaka
  --
• Thumela Imakethe
  --
• Amakhasimende Ahlanganisiwe
  --